Q.E.P.

Q.E.P. 7-in 1 HP Power Pro Tile Saw

  • Item#: 664452
  • MFR#: 22900Q
7-in 1 HP Power Pro Tile Saw
Designed as a portable saw to handle any DIY project but was then improved and strengthened to target the contractor market, since it is ideal on job sites where space prohibits the use of a large wet saw. Users will also be surprised by the strength of it’s true 1 HP motor. The power of this motor allows cutting through ceramic, Terra cotta, granite, etc. The water catch system not only reduces water run off but it recycles the water back into the reservoir minimizing fill frequencies. This is a very powerful addition to your saw line up at a very economical price.
  • Equipped with a powerful 1 HP, 3600 RPM motor and oversized die cast aluminum tilt-up cutting table for 15°, 30° and 45° miter cuts
  • Interior water baffles to minimize water spray and reduce refills and a folding bench-stop to keep the saw in place while making cuts
  • Built in the table top handle
  • Non-slip feet for stability
  • Angle and rip guides for precise cutting
  • Locking on/off switch with security key
  • Side storage
Weight (lb) 39.00
Amperage 6.50
Amps 6.50
Arbor Diameter 5/8-in
Base Warranty Labor (Months) 12.00
Base Warranty Parts (Months) 12.00
Blade Diameter (in) 7.00
Csa Safety Listing No
Cuts Ceramic Yes
Cuts Natural Stone Yes
Cuts Pavers Yes
Cuts Porcelain Yes
Etl Safety Listing No
Gfci Safety Circuit No
Laser Guide No
Maximum Diagonal Cut Continuous
Maximum Rip Capacity Continuous
Maximum Speed (Rpm) 3600.00
Motor Size (Horsepower) 1.00
Series Name N/A
Sliding Table No
Stand No
Type Tabletop
Ul Safety Listing No
Voltage 120.00
Water Pump No
Wet/Dry No
Motor Warranty Labor (Months) 12.00
Motor Warranty Parts (Months) 12.00
Special Warranty Labor (Months) 12.00
Special Warranty Parts (Months) 12.00
Warranty 1-year
Blade Included Yes