7-in 0.75 HP Wet Tile Saw with Rear Support
This 3/4 HP tile saw is equipped with unique back extension table to support large format tiles. Convenient flip up table for 22.5° and 45° miter cuts, adjustable rip guide and angle guide for a variety of cuts. Water spray containment baffle to help keep the surrounding area drier during cutting.
- Unique back extension table to support large format tile during cut
- Powerful 3/4 peak HP motor for cutting ceramic, slate, marble, granite and porcelain
- Interior water baffle minimizes water spray and reduces refills
- Tilt-up cutting table for precise 22.5° and 45° miter cut
- Locking adjustable angle and rip guides for accurate cuts
Weight (lb) | 21.40 |
Amperage | 4.80 |
Amps | 4.80 |
Arbor Diameter | 5/8-in |
Base Warranty Labor (Months) | 12.00 |
Base Warranty Parts (Months) | 12.00 |
Blade Diameter (in) | 7.00 |
Csa Safety Listing | No |
Cuts Ceramic | Yes |
Cuts Natural Stone | No |
Cuts Pavers | No |
Cuts Porcelain | Yes |
Etl Safety Listing | No |
Gfci Safety Circuit | No |
Laser Guide | No |
Maximum Diagonal Cut | Continuous |
Maximum Rip Capacity | Continuous |
Maximum Speed (Rpm) | 3600.00 |
Series Name | N/A |
Sliding Table | No |
Stand | No |
Type | Tabletop |
Ul Safety Listing | No |
Voltage | 120.00 |
Water Pump | No |
Wet/Dry | No |
Motor Warranty Labor (Months) | 12.00 |
Motor Warranty Parts (Months) | 12.00 |
Special Warranty Labor (Months) | 12.00 |
Special Warranty Parts (Months) | 12.00 |
Warranty | 1-year |
Blade Included | Yes |