EasyHeat

EasyHeat Pipe Heat Cable

  • Item#: 24436
  • MFR#: AHB-016
Pipe Heat Cable
Each AHB cable consists of a tough XLPE inner insulation, a continuous ground braid and weather resistant PVC outer jacket. AHB units are activated and de-activated by an integral energy-saving thermostat. Each cable is UL Listed to Canadian Safety Standards and CSA Certified when used in accordance with instructions on water-filled metal or plastic pipes.
  • AHB cables keep water flowing through plastic or metal pipes at ambient temperatures down to -40°F (-40°C)
  • The cables come pre-assembled and ready to install right out of the box
  • The AHB’s bright power indicator light lets you know it’s working at a glance
  • The built-in, energy-saving thermostat automatically keeps the pipe at just the right temperature
  • Keep your water pipes flowing for only nickels per day…the energy-efficient AHB cables only consume 7 watts per foot of cable
  • For use on plastic or metal water-filled supply pipes at least three feet in length and up to 1-1/2 inches in diameter only
  • The circuit supplying the AHB cable MUST have ground fault circuit interrupter (GFCI) protection. If you are unsure that your circuit has GFCI protection, consult an electrician
  • Be sure to follow all the installation instructions supplied with the cable and to make sure the installation complies with all national and local electrical codes
  • Additional installation supplies: scissors, tape measure, file to remove burrs, marking pencil, eye protection, HCA application tape or similar electrical tape, and 1/2-inch wide fiberglass or equivalent non-flammable pipe insulation with vapor seal
Length (ft) 6.00
Csa Safety Listing Yes
Each Order Quantity Equals 6-ft
Etl Safety Listing No
Item Disclaimer In-use/lifestyle image - other accessories not included
Series Name AHB
Ul Safety Listing Yes
Wattage 42.00
Watts 42.00
Warranty 1-year limited
Cut To Length No