EasyHeat EasyHeat AHB-140 40ft 120 VAC Auto Electric Pipe Heating Cable

  • Item#: 275364
  • MFR#: AHB-140
EasyHeat AHB-140 40ft 120 VAC Auto Electric Pipe Heating Cable
  • AHB cables keep water flowing through plastic or metal pipes at ambient temperatures down to -40°F (-40°C)
  • The cables come pre-assembled and ready to install right out of the box
  • The AHB's bright power indicator light lets you know it’s working at a glance
  • The built-in, energy-saving thermostat automatically keeps the pipe at just the right temperature
  • Keep your water pipes flowing for only nickels per day…the energy-efficient AHB cables only consume 7 watts per foot of cable
  • For use on plastic or metal water-filled supply pipes at least three feet in length and up to 1-1/2 inches in diameter only
  • The circuit supplying the AHB cable must have ground fault circuit interrupter (GFCI) protection. If you are unsure that your circuit has GFCI protection, consult an electrician
  • Be sure to follow all the installation instructions supplied with the cable and to make sure the installation complies with all national and local electrical codes
  • Additional installation supplies:scissors, tape measure, file to remove burrs, marking pencil, eye protection, HCA application tape or similar electrical tape, and 1/2-inch wide fiberglass or equivalent non-flammable pipe insulation with vapor seal
Length (ft) 40.00
Csa Safety Listing Yes
Etl Safety Listing No
Series Name AHB
Ul Safety Listing Yes
Wattage 280.00
Watts 280.00
Warranty 1-year limited