Warmer spring temperatures bring your landscape to life. Unfortunately, with warmer temperatures comes tenacious crabgrass. With a little preventative action, you can stop crabgrass from taking over your lawn. If crabgrass has already established itself in your yard, you can remove it, and control its spread and growth.

The best defense against crabgrass is a healthy lawn. Unwanted grasses and weeds simply can't get the necessary toehold to thrive in a robust stand of grass. Keep your yard in tip-top shape with our guide to preventing and controlling crabgrass.
Steps
3
Difficulty
Moderate
Time Required
4hours
Estimated Cost
$$$

What You Need for This Project

Step 1 - Prevent Crabgrass

Crabgrass spreads quickly during the warm summer months. Between midsummer and early fall, each plant produces thousands of seeds. The first frost kills the plants, but the seeds remain dormant through the winter. When the ground temperature warms up, the seeds begin to grow. 

New crabgrass appears from mid-spring to midsummer. The key to crabgrass control is making sure the seeds cannot germinate.

How to Prevent Crabgrass Germination

  • Mow at frequent intervals to keep the grass at a consistent length. Check the recommended mowing heights for your type of grass and cut your lawn at the highest recommended setting. Crabgrass requires plenty of light to germinate, so keep the grass as thick and long as possible to create shade near the soil surface. Cutting your lawn too close produces patches where crabgrass and other weeds can germinate. 
  • Remove no more than one-third of the grass blade at one time when mowing. Removing more not only allows more light to reach weeds, it also can injure the grass. 
  • In an established lawn, water in long, heavy intervals rather than shallow, frequent ones. Watering on an irregular schedule and only when needed promotes deeper root growth that's essential to healthy turf grass. Remember that most established lawns require about one inch of water per week from rain or irrigation. If your lawn is newly-seeded, water in shallow, frequent intervals until the grass gets established. 
  • Fertilize your grass at least once a year, following the package instructions.

Step 2 - Control Crabgrass

If crabgrass has become established in your lawn, proper lawn maintenance alone may not be enough. You will need to use either a pre-emergent herbicide or a post-emergent herbicide depending on the stage of crabgrass growth.

Pre-Emergent Herbicides

Pre-emergent herbicides work by killing the crabgrass seedlings as they germinate. When applying the pre-emergent herbicide, always follow the manufacturer's directions.

How to Use Pre-Emergent Herbicides on Crabgrass

  • Timing is essential when using pre-emergent herbicides. Application times depend a great deal on weather patterns, which vary from region to region. If your area has experienced a warmer than usual winter, you'll probably need to apply the herbicide earlier than usual. 
  • Apply the herbicide when the ground temperature rises above 16 degrees. Since it's difficult for most of us to monitor the soil temperature, there's an easier way. When shrubs start blooming and trees start budding, it's time to apply the herbicide. Warm nights and periods of rainfall encourage crabgrass germination. If your weather fits this pattern, get the herbicide in place right away. 
  • For newly seeded lawns, wait until you have mowed your lawn three times before applying the herbicide to avoid killing the new grass seedlings. 
  • Apply the herbicide uniformly across your lawn. If you miss a spot, crabgrass can get established and then spread to the rest of your lawn. 
  • Do not de-thatch or aerate the lawn after applying the herbicide. Doing so may break the chemical barrier of the herbicide. 
  • Wait two to four months to re-seed the lawn after using a pre-emergent herbicide. 
  • Use a pre-emergent herbicide during late winter or during early spring of the next year to prevent any crabgrass seeds left behind from developing at the next opportunity. 
  • Do not use a pre-emergent herbicide if crabgrass is already in the lawn or if you have just installed sod.

Step 3 - Eliminate a Crabgrass Infestation

If the crabgrass seeds have already sprouted and crabgrass has appeared in your grass, the pre-emergent herbicide won’t work. You will need post-emergent herbicide products to control crabgrass after it has already germinated. 

Post-Emergent Herbicides

Post-emergent herbicides work by killing the crabgrass plants. Apply these herbicides only to the crabgrass that is visible. Read and follow the manufacturer's directions on the product carefully. The amount of post-emergent herbicide that you can safely apply to your lawn depends on the type of grass you have.

How to Use Post-Emergent Herbicides on Crabgrass

  • Check the weather forecast before using a post-emergent herbicide. Apply the herbicide on a calm, sunny day. Rainfall shortly after application will wash the product away before the crabgrass has a chance to absorb it. 
  • For best results, apply the herbicide in the morning after the dew has dried. If you wait until late afternoon, dew or a shower may prevent maximum absorption. 
  • Post-emergent herbicides work best when temperatures are 16 - 32°C These higher temperatures cause the plants to absorb the herbicide quickly; if the temperatures are too cool or weather conditions are too cloudy, the product is likely to be ineffective. 
  • Make sure the soil is moist before applying the herbicide. If not, you should water the area extensively the day before treatment. If conditions are extremely dry, you may want to water again two days after the application. The waiting period will give the crabgrass time to absorb the herbicide. 
  • If you notice the lawn browning suddenly, you may have applied too much herbicide. In this case, water the area extensively as soon as possible to dilute the herbicide and keep it from further damaging your lawn. 
  • After treating the area with the herbicide, keep an eye out for newly germinated crabgrass plants. Any plants that may have germinated since the initial application will require a follow-up spot treatment. 
  • If the crabgrass plants are well established, you'll need to apply the herbicide twice. Treat the affected areas again four to seven days after the first application. Make sure the soil is moist before the second application. 
  • Follow the manufacturer's instructions about when it's safe to re-seed grass. Seed new grass in the area as soon as possible to establish a healthy lawn crabgrass can't break through. 
  • If you use a post-emergent herbicide during the summer, care for your lawn according to the lawn maintenance tips above. 
  • If the majority of your lawn is crabgrass, it may be best not to remove it during the summer. Wait and treat the lawn in the fall.

Note:

When using lawn treatments or lawn care products, always follow package directions regarding proper clothing, protective equipment, application procedures, and safety precautions. When using herbicides, also make sure you understand which weeds the chemical treats and which desirable plants it may also kill.

How To Terms

Tools, products, materials, techniques, building codes, and local regulations change; therefore, Lowe's assumes no liability for omissions, errors, or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures.

Related Articles