Looking for an uncomplicated way to change your landscape? Whether they are round, square or irregularly shaped, the construction method for installing and laying out stepping stones is always the same. Place stones across a well-traveled part of the lawn to reduce wear on the grass and to provide a dry surface for walking.
Stepping stones can dress up almost any landscape. A walkway also serves practical purposes. Place stones across a well-traveled part of the lawn to reduce wear on the grass and to provide a dry surface for walking or use them for a shady path where grass or other plants don't grow well.
Before you start, make sure you have enough stones to complete your path. Wear sturdy boots and gloves during installation.
Lay the stones out along the planned path. Walk their length, rearranging them as needed. Your feet should land squarely on the stones when you take normal strides.
Once the stones are in place, trace their shape in the ground by cutting around the edges of each stone with a sharp, long-handled spade.
Remove the grass under the stone. Make sure you slice deeply enough to get below the roots.
Push a spade under the turf to lift it out, then set the turf on a tarp, cloth or in a wheelbarrow. If you choose to use the sod later, set it aside in a cool place and water
Place the stones and add builder's sand to the hole to level them. Ultimately you want the stones flush with the ground. The stones will settle eventually, so add sand until they sit slightly above the surface.
Add mulch around the stones.