Hang Ten Card Holder

Hang Ten Card Holder
Don't leave invitations, business cards, and photos hanging. Let them star on a kitchen wall with this clever and easy to make card holder project.

STEP-BY-STEP

1. Cut poplar board to desired length. Ours is 28-inches.

2. Drill holes in side of board for pigtail sign holders. Choose a drill bit that will allow for a tight fit.

3. If desired, stain or paint wood.

4. Using a wire cutter, cut three of the pigtail sign holders to 15 inches long and two of the pigtail sign holders to 11 inches long.

5. Apply a drop of glue on the end of pigtail sign holder and insert into the pre-drilled holes in the board.

6. Attach to wall using two screws.
Tools You'll Use
  • Saw
  • Glue
  • Wire Cutters

Lowe's List
  • Pigtail sign holders (#222126)
  • 1 1" x 2" x 4' poplar board (#1075)




GOOD TO KNOW: Depending on your wall space, you can add pigtail wires to both sides of the wood.